Brush Saw

Brush Saw

  • Cut away brush and clear small trees with the brush saw attachment (also known as a brush cutter) 
  • Quickly and conveniently remove small trees up to 15 feet tall without leaving stumps 
  • Saw off trees flush with the ground or just below the surface 
  • Replaceable carbide-tipped teeth 
  • Three cutting angles for leading operational visibility 

Features & Benefits

Top Tasks

  • Cut firebreaks 
  • Clear pastures and grasslands 
  • Clean road and utility line right of ways

How It Works

The brush saw’s counterclockwise blade moves at a speed up to 2,985 feet per minute. The cutting action of the brush saw cuts trees, brush and saplings just below ground level to minimize stumps. 
The operator uses the loader steer and travel functions to swing the brush saw left and right, and to move forward into the material being cut. Materials cut away are discharged to the left and away from the loader and attachment.

Compatible Models




Operating Weight
590 lb
85 in
48 in
29.5 in
Number of Teeth
Tip Speed @ 22 gpm
3,256 ft/min
Degree of Angle Right or Left
Cutting Wheel Diameter
28.5 in
Max. Wheel Tip Speed
2,985 ft/min

Additional Details

The high-torque, low-speed hydraulic motor powers the steel blade, which features replaceable carbide-tipped teeth. Position the boom manually in up to three positions – center, or 12 degrees left or right – to operate with excellent visibility of the cutting and clearing action. Quickly and conveniently remove small trees up to 15 feet tall without leaving stumps.

Unlike a tree shear, this heavy-duty attachment saws off trees flush with the ground or even a little below the surface. Clear the way with the Bobcat® brush saw attachment.


WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.