Brushcat Rotary Cutter
Attachment

Brushcat Rotary Cutter
Attachment

  • Mulches trees and saplings up to 3 inches in diameter  
  • The short deck with superior oscillation follows ground contours for a superior cut 
  • Lightweight deck can be used on many machine sizes 
  • Dual offset motors provide a clean cut every time 
  • Available in cutting widths of 44 inches, 54 inches, 66 inches, 72 inches, and 80 inches

Overview

Handle tough brush-clearing jobs easily with the industry-leading Brushcat™ rotary cutter attachment designed and built for applications in construction, agriculture, municipalities, and parks-and-recreation departments.  

Using the powerful brush cutting action of the dual offset blades, the Brushcat rotary cutter mulches small branches and saplings — up to 3 inches in diameter — and cuts through the thickest grass and brush; all while maintaining the optimum power-to-blade ratio. 

A lightweight, short deck and superior oscillation enable the brush cutter to follow ground contours to maintain a clean cut, even on slopes. 
 
Available high-flow models provide impressive torque for the most challenging brush cutting projects. 

 

Features & Benefits

Top Tasks

  • Clear trails or construction sites 
  • Control brush and undergrowth 
  • Mulch branches and saplings 

How It Works

The Brushcat rotary cutter operates while traveling both in forward and reverse. Front discs on all models allow the attachment to traverse uneven terrain with minimal skips, all while reducing operator fatigue.

Required Components

The following components are required to operate this attachment and must be purchased separately: 

  • Front roller kit 
  • Motor guard 
  • 4-inch, cutting-height blades

 

Compatible Models

Specifications

Units

General

Operating Weight
931 lb
1042 lb
1042 lb
1437 lb
1437 lb
1500 lb
1500 lb
1581 lb
Length
64.1 in
74.1 in
74.1 in
67.2 in
67.2 in
70.4 in
70.4 in
73.8 in
Width
48 in
58 in
58 in
70.3 in
70.3 in
76.3 in
76.3 in
84.3 in
Height
26.5 in
26.5 in
26.5 in
26.5 in
26.5 in
26.5 in
26.5 in
26.5 in
Blade Tip Speed (Minimum Flow @)
9 gal/min 
9 gal/min 
12 gal/min
24 gal/min
15 gal/min
24 gal/min
15 gal/min
24 gal/min
Blade Tip Speed (Minimum Flow)
11,948 ft/min
12,783 ft/min
11,715 ft/min
11,394 ft/min
11,399 ft/min
9,922 ft/min
9,922 ft/min
10,932 ft/min
Blade Tip Speed (Maximum Flow @)
12.5 gal/min
12.5 gal/min
18 gal/min
36 gal/min
24 gal/min
40 gal/min
26 gal/min
40 gal/min
Blade Tip Speed (Maximum Flow)
16,595 ft/min
17,754 ft/min
17,573 ft/min
17,064 ft/min
18,238 ft/min
16,536 ft/min
17,197 ft/min
18,219 ft/min
Flow Range Min
9 gal/min 
9 gal/min 
18 gal/min
24 gal/min
15 gal/min
24 gal/min
15 gal/min
24 gal/min
Flow Range Max
12.5 gal/min
12.5 gal/min
12 gal/min
36 gal/min
24 gal/min
40 gal/min
26 gal/min
40 gal/min
Cutting Width
44 in
54 in
54 in
66 in
66 in
72 in
72 in
80 in
Deck Length
58.2 in
68.2 in
68.2 in
61.1 in
61.1 in
64.3 in
64.3 in
67.7 in
Cutting Height
3 in 
3 in 
3 in 
3 in 
3 in 
3 in 
3 in 
3 in 
Vertical Travel
8 in 
8 in 
8 in 
8 in 
8 in 
8 in 
8 in 
8 in 
Cutting Capacity
2" (51 mm) in Diameter 
2" (51 mm) in Diameter 
2" (51 mm) in Diameter 
3" (76 mm) in Diameter 
3" (76 mm) in Diameter 
3" (76 mm) in Diameter 
3" (76 mm) in Diameter 
3" (76 mm) in Diameter 

 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped), lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.